Bathroom Sink Repair Belle Fontaine AL

When it pertains to bathroom sink repair work, there are a couple of common problems people have: dripping drains, chips in the porcelain and cracks in the ceramic of the sink. Each is quickly solvable with the right know-how.

Leaky Bathroom Drains

Sink InstallationDripping drains prevail in standard sink repair work, yet easily dealt with. The first thing you'll have to do is discover where the leak is coming from. To do this, let water run from the faucet into the sink. Make sure you have a pail positioned to capture water. Shine a flashlight onto the pipelines, and wrap a paper towel around every one to figure out the place of the leak. Next, tighten the couplings in the drainpipe with the leakage. If this does not resolve the problem, try cleaning the pipe threads and replacing the gasket. To do this, you'll have to detach the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in location with a screwdriver or a set of pliers in the crosspiece. Scrub off all the old putty, then insert the brand-new gasket, followed by the sink basket. When this is done, it's simply a matter of tightening up the washer nut, using sealant, and checking the drains as soon as again.

Porcelain sink repair work deals with chips more than cracks, simply as ceramic sink repair work includes fractures more than chips. However, you can take the exact same steps to handle both. First, you have to clean up the sink to the very best of your ability, so as not to get dirt permanently in the sealant.

Sink Replacement

Later on, use sandpaper to sand the chipped location. Be careful not to scratch the smooth surrounding surface area with the sandpaper. Once the chip or gouge has been sanded, apply a silicone filler or repair work compound to the damaged area. Allow it to dry as instructed by the maker, then sand down the fixed location so that the filled area is level with the rest of the sink. Lastly, discover a porcelain touch-up paint that best matches your sink's color and apply to the fixed location.
Your sink stopper might also need repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which fastens the stopper to the sink. Get rid of both the clevis and the pivot rod, soaking them in vinegar or another cleaning option. On the other hand, get rid of the stopper from the drain and inspect it for damage. Pay special attention to the rubber seal. If you have to replace the seal or stopper, it's a simple matter of following the manufacturer's guidelines. Otherwise, soak the stopper in the cleansing option, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed