Bathroom Sink Repair Camp Hill AL

When it pertains to bathroom sink repair, there are a couple of common issues people have: leaking drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily understandable with the right know-how.

Leaky Bathroom Drains

Sink InstallationLeaky drains prevail in basic sink repair, yet easily handled. The first thing you'll have to do is find where the leak is coming from. To do this, let water range from the faucet into the sink. Ensure you have a container placed to catch water. Shine a flashlight onto the pipelines, and cover a paper towel around every one to identify the location of the leakage. Next, tighten up the couplings in the drain with the leakage. If this doesn't solve the issue, try cleaning the pipe threads and replacing the gasket. To do this, you'll have to separate the sink basket from the basin, using a wrench to loosen the nuts. Keep the basin in location with a screwdriver or a pair of pliers in the crosspiece. Scrub off all the old putty, then place the new gasket, followed by the sink basket. When this is done, it's simply a matter of tightening the washer nut, applying sealant, and checking the drains when again.

Porcelain sink repair deals with chips more than fractures, simply as ceramic sink repair involves cracks more than chips. However, you can take the very same actions to handle both. Initially, you need to clean the sink to the best of your capability, so as not to get dirt permanently in the sealant.

Sink Replacement

Afterwards, utilize sandpaper to sand the cracked location. Take care not to scratch the smooth surrounding surface with the sandpaper. Once the chip or gouge has been sanded, use a silicone filler or repair work substance to the damaged location. Allow it to dry as instructed by the maker, then sand down the repaired location so that the filled area is level with the remainder of the sink. Finally, find a porcelain touch-up paint that finest matches your sink's color and use to the repaired location.
Your sink stopper might likewise require repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which secures the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleaning solution. On the other hand, remove the stopper from the drain and inspect it for damage. Pay special attention to the rubber seal. If you need to change the seal or stopper, it's a simple matter of following the maker's guidelines. Otherwise, soak the stopper in the cleansing solution, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed