Bathroom Sink Repair Cowarts AL

When it pertains to bathroom sink repair work, there are a couple of typical problems people have: dripping drains, chips in the porcelain and cracks in the ceramic of the sink. Each is easily solvable with the right know-how.

Leaky Bathroom Drains

Sink InstallationLeaky drains prevail in fundamental sink repair, yet easily handled. The first thing you'll need to do is discover where the leak is originating from. To do this, let water range from the faucet into the sink. Make sure you have a pail placed to catch water. Shine a flashlight onto the pipes, and cover a paper towel around every one to identify the location of the leak. Next, tighten up the couplings in the drainpipe with the leakage. If this doesn't solve the problem, attempt cleaning the pipeline threads and changing the gasket. To do this, you'll have to separate the sink basket from the basin, utilizing a wrench to loosen the nuts. Keep the basin in place with a screwdriver or a set of pliers in the crosspiece. Scrub off all of the old putty, then insert the new gasket, followed by the sink basket. Once this is done, it's simply a matter of tightening up the washer nut, using sealant, and testing the drains once again.

Porcelain sink repair work deals with chips more than fractures, simply as ceramic sink repair involves fractures more than chips. However, you can take the same actions to handle both. First, you need to clean up the sink to the best of your ability, so as not to obtain dirt permanently in the sealant.

Sink Replacement

Later on, use sandpaper to sand the chipped location. Be careful not to scratch the smooth surrounding surface with the sandpaper. Once the chip or gouge has been sanded, use a silicone filler or repair compound to the damaged area. Enable it to dry as advised by the producer, then sand down the repaired area so that the filled location is level with the remainder of the sink. Finally, discover a porcelain touch-up paint that best matches your sink's color and use to the repaired area.
Your sink stopper might also need repair or replacement. If you have a sink stopper, there will be a horizontal pivot rod linked to a vertical clevis, which attaches the stopper to the sink. Eliminate both the clevis and the pivot rod, soaking them in vinegar or another cleansing option. Meanwhile, eliminate the stopper from the drain and check it for damage. Pay special attention to the rubber seal. If you have to change the seal or stopper, it's a simple matter of following the maker's directions. Otherwise, soak the stopper in the cleaning solution, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed