Bathroom Sink Repair Hurtsboro AL

When it concerns bathroom sink repair, there are a few typical issues people have: leaking drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily understandable with the ideal know-how.

Leaky Bathroom Drains

Sink InstallLeaky drains prevail in basic sink repair, yet easily dealt with. The very first thing you'll have to do is discover where the leakage is originating from. To do this, let water run from the faucet into the sink. Make sure you have a pail positioned to capture water. Shine a flashlight onto the pipes, and cover a paper towel around every one to identify the location of the leak. Next, tighten the couplings in the drainpipe with the leakage. If this does not resolve the problem, attempt cleaning the pipeline threads and replacing the gasket. To do this, you'll need to separate the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in location with a screwdriver or a set of pliers in the crosspiece. Scrub off all the old putty, then place the new gasket, followed by the sink basket. As soon as this is done, it's simply a matter of tightening the washer nut, using sealant, and testing the drains as soon as again.

Porcelain sink repair work handle chips more than cracks, just as ceramic sink repair involves fractures more than chips. However, you can take the very same actions to handle both. First, you have to clean the sink to the best of your ability, so as not to obtain dirt permanently in the sealant.

Sink Replacement

Later on, use sandpaper to sand the chipped area. Take care not to scratch the smooth surrounding surface with the sandpaper. Once the chip or gouge has been sanded, use a silicone filler or repair substance to the broken location. Enable it to dry as instructed by the manufacturer, then sand down the fixed location so that the filled area is level with the remainder of the sink. Lastly, find a porcelain touch-up paint that best matches your sink's color and use to the fixed area.
Your sink stopper might also need repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod linked to a vertical clevis, which fastens the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleansing service. On the other hand, remove the stopper from the drain and examine it for damage. Pay unique attention to the rubber seal. If you have to change the seal or stopper, it's a simple matter of following the producer's instructions. Otherwise, soak the stopper in the cleansing solution, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed