Bathroom Sink Repair Somerville AL

When it comes to bathroom sink repair, there are a few common problems people have: leaky drains, chips in the porcelain and cracks in the ceramic of the sink. Each is easily solvable with the right know-how.

Leaky Bathroom Drains

Sink Installation ServicesDripping drains prevail in standard sink repair work, yet easily dealt with. The first thing you'll have to do is find where the leakage is coming from. To do this, let water range from the faucet into the sink. Make sure you have a pail placed to capture water. Shine a flashlight onto the pipelines, and cover a paper towel around each one to identify the location of the leak. Next, tighten up the couplings in the drainpipe with the leak. If this doesn't fix the problem, try cleaning the pipe threads and replacing the gasket. To do this, you'll have to separate the sink basket from the basin, using a wrench to loosen the nuts. Keep the basin in place with a screwdriver or a pair of pliers in the crosspiece. Scrub off all the old putty, then place the new gasket, followed by the sink basket. When this is done, it's just a matter of tightening the washer nut, using sealant, and testing the drains once again.

Porcelain sink repair work deals with chips more than cracks, just as ceramic sink repair work includes cracks more than chips. However, you can take the same steps to deal with both. Initially, you have to clean up the sink to the best of your capability, so as not to get dirt completely in the sealant.

Sink Replacement

Afterwards, use sandpaper to sand the broken area. Take care not to scratch the smooth surrounding surface area with the sandpaper. As soon as the chip or gouge has been sanded, apply a silicone filler or repair work substance to the damaged area. Allow it to dry as instructed by the producer, then sand down the repaired area so that the filled location is level with the remainder of the sink. Lastly, find a porcelain touch-up paint that best matches your sink's color and apply to the fixed area.
Your sink stopper might also need repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which secures the stopper to the sink. Eliminate both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. On the other hand, eliminate the stopper from the drain and check it for damage. Pay unique attention to the rubber seal. If you have to change the seal or stopper, it's a simple matter of following the manufacturer's instructions. Otherwise, soak the stopper in the cleansing service, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed