Bathroom Sink Repair Wilton AL

When it comes to bathroom sink repair, there are a couple of typical issues people have: leaky drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily solvable with the ideal know-how.

Leaky Bathroom Drains

Sink RepairDripping drains are common in standard sink repair work, yet quickly handled. The first thing you'll need to do is discover where the leak is coming from. To do this, let water run from the faucet into the sink. Ensure you have a bucket placed to capture water. Shine a flashlight onto the pipes, and wrap a paper towel around each one to identify the location of the leak. Next, tighten up the couplings in the drainpipe with the leak. If this does not solve the problem, try cleaning up the pipeline threads and replacing the gasket. To do this, you'll have to detach the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in location with a screwdriver or a pair of pliers in the crosspiece. Scrub off all the old putty, then insert the new gasket, followed by the sink basket. Once this is done, it's just a matter of tightening the washer nut, applying sealant, and evaluating the drains once again.

Porcelain sink repair work deals with chips more than fractures, just as ceramic sink repair involves cracks more than chips. However, you can take the exact same actions to deal with both. First, you need to clean the sink to the best of your capability, so as not to get dirt completely in the sealant.

Sink Replacement

Later on, use sandpaper to sand the chipped location. Beware not to scratch the smooth surrounding surface with the sandpaper. When the chip or gouge has actually been sanded, use a silicone filler or repair work compound to the broken location. Enable it to dry as instructed by the producer, then sand down the repaired location so that the filled location is level with the rest of the sink. Finally, find a porcelain touch-up paint that best matches your sink's color and apply to the repaired area.
Your sink stopper may also need repair or replacement. If you have a sink stopper, there will be a horizontal pivot rod linked to a vertical clevis, which attaches the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. On the other hand, remove the stopper from the drain and check it for damage. Pay special focus on the rubber seal. If you need to change the seal or stopper, it's a simple matter of following the manufacturer's instructions. Otherwise, soak the stopper in the cleaning option, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed