Bathroom Sink Repair Englewood CO

When it concerns bathroom sink repair work, there are a couple of typical issues individuals have: dripping drains, chips in the porcelain and fractures in the ceramic of the sink. Each is quickly solvable with the best know-how.

Leaky Bathroom Drains

Sink InstallationLeaky drains are common in standard sink repair work, yet easily handled. The first thing you'll need to do is find where the leak is coming from. To do this, let water run from the faucet into the sink. Make sure you have a container positioned to catch water. Shine a flashlight onto the pipelines, and cover a paper towel around each one to figure out the place of the leak. Next, tighten the couplings in the drain with the leak. If this doesn't resolve the issue, attempt cleaning the pipeline threads and replacing the gasket. To do this, you'll need to separate the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in place with a screwdriver or a set of pliers in the crosspiece. Scrub off all of the old putty, then insert the brand-new gasket, followed by the sink basket. Once this is done, it's just a matter of tightening the washer nut, applying sealant, and testing the drains when again.

Porcelain sink repair deals with chips more than fractures, simply as ceramic sink repair work involves cracks more than chips. However, you can take the very same actions to deal with both. Initially, you need to clean up the sink to the very best of your capability, so as not to get dirt permanently in the sealant.

Sink Replacement

Later on, use sandpaper to sand the broken area. Take care not to scratch the smooth surrounding surface with the sandpaper. As soon as the chip or gouge has been sanded, apply a silicone filler or repair work substance to the broken area. Enable it to dry as instructed by the maker, then sand down the fixed area so that the filled location is level with the rest of the sink. Finally, find a porcelain touch-up paint that best matches your sink's color and apply to the repaired location.
Your sink stopper might also require repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod linked to a vertical clevis, which attaches the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. Meanwhile, remove the stopper from the drain and inspect it for damage. Pay special focus on the rubber seal. If you need to change the seal or stopper, it's an easy matter of following the manufacturer's directions. Otherwise, soak the stopper in the cleaning solution, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed