Bathroom Sink Repair Holly CO

When it comes to bathroom sink repair work, there are a few typical problems people have: dripping drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily solvable with the best know-how.

Leaky Bathroom Drains

Sink Installation ServicesLeaky drains prevail in fundamental sink repair, yet quickly handled. The first thing you'll need to do is discover where the leak is coming from. To do this, let water range from the faucet into the sink. Ensure you have a bucket placed to capture water. Shine a flashlight onto the pipelines, and cover a paper towel around each one to figure out the location of the leak. Next, tighten the couplings in the drain with the leak. If this does not fix the problem, attempt cleaning the pipeline threads and replacing the gasket. To do this, you'll have to remove the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in place with a screwdriver or a pair of pliers in the crosspiece. Scrub off all the old putty, then insert the new gasket, followed by the sink basket. Once this is done, it's simply a matter of tightening up the washer nut, applying sealant, and checking the drains when again.

Porcelain sink repair deals with chips more than cracks, just as ceramic sink repair work includes fractures more than chips. However, you can take the very same steps to handle both. First, you have to clean up the sink to the very best of your ability, so as not to obtain dirt permanently in the sealant.

Sink Replacement

Later on, use sandpaper to sand the chipped location. Take care not to scratch the smooth surrounding surface area with the sandpaper. As soon as the chip or gouge has been sanded, apply a silicone filler or repair work compound to the broken location. Permit it to dry as advised by the producer, then sand down the repaired location so that the filled area is level with the rest of the sink. Finally, discover a porcelain touch-up paint that finest matches your sink's color and apply to the repaired area.
Your sink stopper might likewise need repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which fastens the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleansing solution. On the other hand, remove the stopper from the drain and check it for damage. Pay special attention to the rubber seal. If you have to change the seal or stopper, it's an easy matter of following the producer's directions. Otherwise, soak the stopper in the cleansing service, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed