Bathroom Sink Repair Inverness CO

When it comes to bathroom sink repair, there are a couple of typical issues people have: leaky drains, chips in the porcelain and cracks in the ceramic of the sink. Each is easily solvable with the right know-how.

Leaky Bathroom Drains

Sink Repair ServicesLeaking drains prevail in basic sink repair, yet quickly dealt with. The very first thing you'll need to do is find where the leak is originating from. To do this, let water run from the faucet into the sink. Make sure you have a pail placed to capture water. Shine a flashlight onto the pipes, and wrap a paper towel around each one to figure out the area of the leak. Next, tighten the couplings in the drain with the leakage. If this does not fix the issue, try cleaning up the pipe threads and changing the gasket. To do this, you'll need to separate the sink basket from the basin, utilizing a wrench to loosen the nuts. Keep the basin in place with a screwdriver or a set of pliers in the crosspiece. Scrub off all the old putty, then place the brand-new gasket, followed by the sink basket. As soon as this is done, it's just a matter of tightening up the washer nut, applying sealant, and checking the drains when again.

Porcelain sink repair deals with chips more than cracks, just as ceramic sink repair work includes fractures more than chips. Nevertheless, you can take the same actions to handle both. Initially, you need to clean up the sink to the best of your ability, so as not to obtain dirt permanently in the sealant.

Sink Replacement

Afterwards, use sandpaper to sand the chipped location. Take care not to scratch the smooth surrounding surface with the sandpaper. As soon as the chip or gouge has been sanded, use a silicone filler or repair work substance to the broken area. Enable it to dry as instructed by the maker, then sand down the fixed location so that the filled location is level with the rest of the sink. Lastly, find a porcelain touch-up paint that finest matches your sink's color and use to the fixed location.
Your sink stopper may also require repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which attaches the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleansing service. On the other hand, get rid of the stopper from the drain and examine it for damage. Pay unique focus on the rubber seal. If you have to replace the seal or stopper, it's a simple matter of following the manufacturer's directions. Otherwise, soak the stopper in the cleaning option, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed