Bathroom Sink Repair Bloomingdale IL

When it concerns bathroom sink repair, there are a couple of common problems people have: dripping drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily solvable with the best know-how.

Leaky Bathroom Drains

Leaking drains prevail in basic sink repair work, yet easily handled. The first thing you'll need to do is find where the leak is coming from. To do this, let water run from the faucet into the sink. Make sure you have a pail positioned to catch water. Shine a flashlight onto the pipes, and wrap a paper towel around each one to identify the location of the leakage. Next, tighten up the couplings in the drain with the leakage. If this doesn't solve the problem, try cleaning the pipeline threads and changing the gasket. To do this, you'll need to remove the sink basket from the basin, using a wrench to loosen the nuts. Keep the basin in place with a screwdriver or a set of pliers in the crosspiece. Scrub off all of the old putty, then place the new gasket, followed by the sink basket. Once this is done, it's merely a matter of tightening the washer nut, using sealant, and evaluating the drains when again.

Porcelain sink repair deals with chips more than cracks, just as ceramic sink repair work includes cracks more than chips. However, you can take the same steps to deal with both. Initially, you have to clean up the sink to the very best of your ability, so as not to get dirt permanently in the sealant.

Sink Replacement

Afterwards, use sandpaper to sand the broken area. Be careful not to scratch the smooth surrounding surface area with the sandpaper. Once the chip or gouge has been sanded, apply a silicone filler or repair compound to the broken location. Allow it to dry as instructed by the producer, then sand down the fixed location so that the filled area is level with the rest of the sink. Finally, discover a porcelain touch-up paint that best matches your sink's color and apply to the fixed location.
Your sink stopper may also need repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which secures the stopper to the sink. Get rid of both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. On the other hand, get rid of the stopper from the drain and check it for damage. Pay special focus on the rubber seal. If you have to change the seal or stopper, it's a simple matter of following the maker's guidelines. Otherwise, soak the stopper in the cleaning solution, reassemble the pivot rod and clevis, and test to see if it's working.