Bathroom Sink Repair Falls KS

When it pertains to bathroom sink repair work, there are a few common issues individuals have: dripping drains, chips in the porcelain and fractures in the ceramic of the sink. Each is easily understandable with the right know-how.

Leaky Bathroom Drains

Sink RepairLeaking drains are common in standard sink repair work, yet easily handled. The very first thing you'll have to do is discover where the leak is originating from. To do this, let water run from the faucet into the sink. Ensure you have a pail positioned to catch water. Shine a flashlight onto the pipes, and cover a paper towel around each one to identify the area of the leakage. Next, tighten up the couplings in the drain with the leakage. If this doesn't resolve the problem, try cleaning up the pipeline threads and replacing the gasket. To do this, you'll need to remove the sink basket from the basin, using a wrench to loosen up the nuts. Keep the basin in location with a screwdriver or a pair of pliers in the crosspiece. Scrub off all of the old putty, then insert the brand-new gasket, followed by the sink basket. When this is done, it's merely a matter of tightening the washer nut, using sealant, and checking the drains when again.

Porcelain sink repair handle chips more than cracks, just as ceramic sink repair includes cracks more than chips. However, you can take the exact same steps to handle both. Initially, you have to clean the sink to the best of your capability, so as not to get dirt completely in the sealant.

Sink Replacement

Afterwards, use sandpaper to sand the broken area. Be careful not to scratch the smooth surrounding surface area with the sandpaper. Once the chip or gouge has been sanded, apply a silicone filler or repair compound to the damaged area. Enable it to dry as instructed by the manufacturer, then sand down the repaired area so that the filled area is level with the remainder of the sink. Finally, find a porcelain touch-up paint that finest matches your sink's color and use to the fixed location.
Your sink stopper may also require repair or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which attaches the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. On the other hand, remove the stopper from the drain and inspect it for damage. Pay special focus on the rubber seal. If you need to replace the seal or stopper, it's a basic matter of following the manufacturer's instructions. Otherwise, soak the stopper in the cleaning option, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed