Bathroom Sink Repair Pomona KS

When it concerns bathroom sink repair, there are a couple of common issues people have: dripping drains, chips in the porcelain and cracks in the ceramic of the sink. Each is easily understandable with the best know-how.

Leaky Bathroom Drains

Sink InstallationDripping drains are common in fundamental sink repair work, yet quickly handled. The first thing you'll need to do is discover where the leakage is coming from. To do this, let water range from the faucet into the sink. Ensure you have a bucket positioned to capture water. Shine a flashlight onto the pipes, and wrap a paper towel around each one to figure out the location of the leak. Next, tighten the couplings in the drain with the leak. If this does not fix the problem, try cleaning the pipe threads and replacing the gasket. To do this, you'll need to remove the sink basket from the basin, using a wrench to loosen the nuts. Keep the basin in place with a screwdriver or a set of pliers in the crosspiece. Scrub off all the old putty, then place the new gasket, followed by the sink basket. When this is done, it's simply a matter of tightening the washer nut, applying sealant, and evaluating the drains as soon as again.

Porcelain sink repair deals with chips more than fractures, just as ceramic sink repair includes cracks more than chips. However, you can take the very same steps to deal with both. Initially, you need to clean the sink to the best of your capability, so as not to get dirt permanently in the sealant.

Sink Replacement

Afterwards, use sandpaper to sand the cracked location. Take care not to scratch the smooth surrounding surface area with the sandpaper. When the chip or gouge has actually been sanded, use a silicone filler or repair compound to the broken location. Enable it to dry as advised by the maker, then sand down the repaired area so that the filled area is level with the rest of the sink. Finally, discover a porcelain touch-up paint that best matches your sink's color and use to the repaired area.
Your sink stopper may likewise require repair work or replacement. If you have a sink stopper, there will be a horizontal pivot rod connected to a vertical clevis, which attaches the stopper to the sink. Remove both the clevis and the pivot rod, soaking them in vinegar or another cleaning service. Meanwhile, eliminate the stopper from the drain and inspect it for damage. Pay special attention to the rubber seal. If you need to change the seal or stopper, it's a simple matter of following the manufacturer's instructions. Otherwise, soak the stopper in the cleaning option, reassemble the pivot rod and clevis, and test to see if it's working.


Additional Services
Toilet Repair and Drain Clearing

Need A Plumber

Call us today to get started!

Why Choose Us?

  • 20+ Years Of Experience
  • Open 24 Hours Everyday
  • Fast Arrival Time
  • Competitive Pricing
  • Locally Owned & Operated
  • Accepting Credit Cards
  • Quick and Honest Service
  • Satisfaction Guaranteed